<ruby id="jnxxm"></ruby>
  1. <dd id="jnxxm"></dd>

      <button id="jnxxm"><object id="jnxxm"></object></button>

      1. <em id="jnxxm"><acronym id="jnxxm"></acronym></em>

      2. <dd id="jnxxm"></dd>
        1. 您的當前位置: 首 頁 >> 產品中心 >> 復卷機

          產品分類

          products

          '.png

          電話:+86-757-81260486

          傳真:+86-757-26154135

          網址:www.yazuo666.com

          地址:佛山市南海區獅山鎮獅北

          工業園興業路邊廠房三

          獨立傳動復卷機

          • 所屬分類:復卷機

          • 點擊次數:
          • 發布日期:2018/08/20
          • 在線詢價
          詳細介紹

          1.升速及降速時主機與后架、壓花等同步性好,復卷速度得到提高,生產速度由原0-180米/分鐘提升至0-230米/分鐘。

          2.主機與壓花、壓紋、后架間不再需要傳動鏈條、減速箱等機械傳動。大大減少故障維修及機器調整時間。

          3. 用PLC異步伺服控制,從電機跟隨主電機運轉,復卷過程紙面張力的穩定。避免了鏈條傳動開停機引起的紙面一松一緊所造成的紙面起皺,打孔節距波動、紙球松緊不一等缺陷。

          4. 各功能單元間張力調整通過觸摸屏設定參數,操作方便快捷。

          5.退紙架采用墻板式結構(30mm),扎實美觀。機底留空有利于紙塵的清理。

          ZQ-III Advantages of independent drive rewinding machine:

          Each function unit is controlled by an independent encoder motor, and PLC asynchronous servo control is used to follow the main motor from the motor.

          1. At the time of acceleration and speed reduction, the synchronization between the host and the rear frame, embossing, etc. is good, and the rewinding speed is improved. The production speed is increased from 0-180 m/min to 0-230 m/min.

          2. The main engine and embossing, embossing, and rear frame no longer require mechanical transmission such as transmission chains and speed reduction boxes. Reduce the time of repair and machine adjustment greatly.

          3. Using PLC asynchronous servo control, following the main motor from the motor, the paper tension of the rewinding process is stable. Avoiding the paper paper wrinkle caused by the opening and stopping of the chain drive, the pitch fluctuation of the punch, and the tightening of the paper ball are not the same defects.

          4. The tension adjustment between the functional units is convenient and quick through the touch screen setting parameters.

          5. The paper backing frame adopts a wallboard structure(30mm) and is solid and beautiful. Leaving the bottom of the machine empty is conducive to the cleaning of paper dust.



          型號(Model)

          ZQ-III-E250 1092

          ZQ-III-E250 1575

          ZQ-III-E250 1760

          ZQ-III-E250 2200

          ZQ-III-E250 2500

          ZQ-III-E250 2900

          原紙寬度

          (Max width of raw paper)

          1350mm

          1750mm

          2000mm

          2150mm

          2400mm

          2800mm

          設計速度

          (Design speed)

          0-250/m/min

          操作速度

          (Operation speed)

          0-230/m/min

          原紙Z大外徑

          (Max outer diameter of raw paper)

          1100mm,其他請注明(Others please specify)

          原紙紙芯內徑

          (Inner diameter of raw paper core)

          3"、76mm,其他請注明(Others please specify)

          成品外徑

          (Outer diameter of finished product)

          90-145mm,其他請注明(Others please specify)

          成品紙芯外徑

          (Outer diameter of finished product core)

          25-55mm,其他請注明(Others please specify)

          成品完成條件

          (Product finish condition)

          總長度/直徑(Total length/diameter)

          主要傳動力

          (Power)

          5.5~22KW變頻速度(Varial frequency speed regulating)

          參數設定

          (Parameter setting)

          HMI觸摸屏控制(Touch screen operation panel)

          編程控制器

          (Procedure control)

          PLC

          剎車

          (Brake)

          電子、氣壓控制(electric&pneumatic control)

          機械傳動

          (Mechanical transmission)

          各部分用獨立變頻電機與同步帶傳動

          (Each part is driven by an independent frequency converter motor and a synchronous belt)

          氣動系統

          (Pneumatic system)

          4匹空氣壓縮機,Z小壓力5KG/CM2PA,客戶自備4HP

          (air compressor,which the min pressure is 5KG/CM2PA(supplied by user)

          打孔刀

          (Perforating blade)

          4片螺旋刀(4pcs spiral blades)

          打孔節距

          (Perforating Size)

          108mm+-2mm),請指定(Others please specify)

          可選項(Options)

          可調節打孔節距

          (Adjustable perforating Size)

          90~140mm/200~450mm/200~500mm

          無芯功能

          (Coreless function)

          生產無芯卷紙

          (Produce coreless roll)

          后架

          (Backstand)

          獨立驅動墻板式后架,1~4

          (Independent motors,1~4plies)

          壓花

          (Embossing)

          鋼對膠輥、毛布輥、羊毛輥、鋼輥、獨立驅動

          (Embossing,steel to steel/felted/woolen/rubber,
          Independent drive

          上膠復合

          (Lamination)

          點對點/點對底/其他

          (Point to point/nested/others)

          壓邊紋

          (Edge-embossing)

          氣囊式

          (Air bag type)

          壓扁單元

          (Pressing unit)

          用于無芯紙

          (For coreless roll)

          關鍵詞:復卷機

          Z近瀏覽:

        2. 在線客服
        3. 聯系電話
          13798633348
        4. 在線留言
        5. 在線咨詢
          歡迎給我們留言
          請在此輸入留言內容,我們會盡快與您聯系。
          姓名
          聯系人
          電話
          座機/手機號碼
          郵箱
          郵箱
          地址
          地址
          久久综合九色综合欧美_久久国产精品一区二区_操老熟女视频_黄网址在线